HDMI and SDI Video -Encoder to DVB-Modulator
Our Encoder-Modulators are available in different numbers of RF-output Channels and Features - COFDM (DVB-T) upon request...
The almost often - use case is: Adding own encoded individual Channels to an existing CATV Network as DVB-T or -C bouquet's
HDM-94xyC were xy=08,16 or 24 HDMI to DVB-C channels (or T, ... upon Request)
Features:
- 8, 16 or 24 HDMI inputs with AVC/H.264 HD/SD Encoding
- Excellent non-adjacent RF output performance: MER≥40db + seperate -20dB Test-Output port
- MPEG-1 Layer 2, LC-AAC, HE-AAC and AC3 Pass through Audio encoding/li>
- 1 ASI IN and 128 SPTS Inputs to select and mux into RF-out channels
- Nx MPTS IP output over UDP, RTP/RTSP to monitor or forwarding
- Accurate PCR adjusting, PID remapping supported
- PCR adjusting/PSI/SI editing and inserting / PID Remapping/PID pass
- USB FAT32 – TS player to insert an own INFO channel
- DVB-C/DVB-T/ATSC-T/ISDB-T RF out selectable (from factory) -> So always use proper character when ordering: C/T/I/A
- 8(T) or 12(C) Channels/Bouquets multiplexing DVB-C or –T modulating agile RF-Channels
- Web-based Network management and Logo/Text injections to the encoded Video's
HDM-95xy were xy=04 or 08 HDMI to DVB-C channels (or T, ... upon Request)
Features:
- Available with 4 or 8 HDMI-Inputs to RF-DVB-C QAM Channel out
- MPEG4 AVC/H.264 HD/SD Video Codec and Audio: MPEG-1 Layer 2, LC-AAC, HE-AAC and AC3 Pass through encoding
- RF Out: 4(T/C) or 2(T/C) Channels /Bouquets multiplexing DVB-C or –T modulating RF outputs – adjacent
- 1 ASI IN and 64/128 IP SPTS Inputs to multiplex into the output TS
- Nx MPTS IP parallel output over UDP, RTP/RTSP
- Accurate PCR adjusting
- PID filtering and re-mapping, CA-Filter, PSI/SI rebuilding and editing
- DVB-C/DVB-T/ATSC-T/ISDB-T RF out selectable (by order) -> So always use proper character when ordering: C/T/I/A
- Web-based Network management and Logo/Text injections to the encoded Video's
HDM-4200 Low latency HDMI or HD-SDI MPEG2 and h.264 Encoder-Modulator
Features:
- HDM-4230C = 4x HDMI and HDM-4220C = 4x HD-SDI with DVB-C out (consider for orders: T = DVB-T output)
- RF Frequency range 30…960Mhz with excellent modulation quality MER ≥ 42dB
- MPEG2 and MPEG4 AVC/H.264 HD/SD Video encoder with Audio-Codecs: MPEG-1 Layer 2, LC-AAC, HE-AAC and AC3 Stereo (optional)
- Enhanced video buffer (for SDI interface), selectable switching of video sources
- Up to 1920x1080@50p/60p (MPEG4 AVC/H.264) and up to 1920x1080@50i/60i supported (MPEG2 HD)
- 1x ASI input for re-multiplex; 1x RF input for mixing into existing CATV-networks
- Simultaneously encoding with more than 10Mbps
- IP stream output: 4x SPTS or 1x MPTS
- LCN support (Logical Channel Number) in NIT
- Web-based Network management and Logo/Text injections to the encoded Video's
- A mixed installation of 1 dual HD-SDI and 1 dual HDMI Module is possible but need to be mentioned when ordering
- Available with 12 HD-SDI Inputs as HDM-12220C/T
our little guy: HDM-901C (T) 1x HDMI/CVBS to 1x DVB-T/C as a simple cost effective Info-Channel Modulator
Features:
- The ultimate cost effective DVB-Channel inserter for Hotels and Hospitals
- HDMI - A/V encoder with DVB-C/T compliant QAM /COFDM one channel modulator with selectable CVBS or HDMI Full-HD Input.
- Input: 1x HDMI or FBAS/CVBS + Stereo - Output: CATV – Coax RF signal with integrated combiner
- MPEG4 AVC/H.264 Encoder up to 1080p60 and Audio encoding MPEG1 Layer2
- Nominal RF Output power max. 94dBμV,Range: 1...899MHz
- DVB-C QAM: 8MHz, Symbol Rate up to 9000 in 16, 64, 128, 256QAM modulation modes
- or DVB-T COFDM: 6,7, 8MHz max. 1/32 GI, FFT 2k/8k
- Wall mounting case